Chart air quality data
What’s new
The Department of Environment and Science is introducing smoke sensors to provide more Queensland communities with local indicative measurements and health action advice during smoke and dust events. This sensor network will continue to expand into more locations over time. Sensor measurements can be viewed in the data table under the new 'Sensor' tab, or via the smoke and dust health action levels page.
Hydrogen sulfide monitoring is being undertaken in the Swanbank area by the department in response to community concerns around odour.
Nitrogen dioxide at Mutdapilly, Monday 3 October 2022 about Nitrogen dioxide
None of the data is validated (0% validated, 0/24 records)
Legend to air quality category colours about category values
- Good
- Fair
- Poor
- Very poor
- Extremely poor
None of the data is validated (0% validated, 0/48 records)
About air quality categories
Air quality categories are used to make it easier to interpret air quality data by reducing the complexity associated with different pollutant concentration units and air quality guideline values.
Each air quality measurement from a monitoring station is assigned an air quality category rating based on comparison of the measurement value against the relevant air quality guideline. Five colour-coded air quality categories are used, being ‘Good’ (green), ‘Fair’ (yellow), ‘Poor’ (orange), ‘Very poor’ (red) or ‘Extremely poor’ (dark red). Values greater than the air quality guideline will be appear as ‘Poor’, ‘Very poor’ or ‘Extremely poor’.
About Nitrogen dioxide
Nitrogen dioxide is an acidic and highly corrosive gas. Nitrogen oxides are critical components of photochemical smog. Long-term exposure to high levels of nitrogen dioxide can cause chronic lung disease and affect the senses.
The guideline for Nitrogen dioxide is 0.08ppm (1hr avg).
Nitrogen dioxide is measured in parts per million.
