Skip links and keyboard navigation

Chart air quality data

What’s new

The Department of Environment and Science is introducing smoke sensors to provide more Queensland communities with local indicative measurements and health action advice during smoke and dust events. This sensor network will continue to expand into more locations over time. Sensor measurements can be viewed in the data table under the new 'Sensor' tab, or via the smoke and dust health action levels page.

Hydrogen sulfide monitoring is being undertaken in the Swanbank area by the department in response to community concerns around odour.

    Air quality data is available from 1 January 2016. Individual stations have been monitoring for different time periods so data may not be available for all possible times.
    Miles Airport station began monitoring air quality on 2 July 2015.

Wind speed at Miles Airport, Sunday 2 October 2022 about Wind speed

Miles Airport station overview

No data available for Wind speed at Miles Airport for Sunday 2 October 2022.

The monitoring station may have been offline due to equipment servicing or failure. See network status for long-term data outages.

About Wind speed

When high pollutant concentrations occur at a monitoring station, wind data records can determine the general direction and area of the emissions. Identifying the sources means planning to reduce the impacts on air quality can take place.

Wind speed is measured in metres per second.

Licence
Creative Commons Attribution 4.0 International (CC BY 4.0)
Last updated
1 November 2022
  1. Is your feedback about:
  2. (If you chose ‘website’ above)

    Page feedback

    1. How satisfied are you with your experience today? *
  3. (If you chose ‘service’ above)

    Feedback on government services, departments and staff

    Please use our complaints and compliments form.