Live air data
The Queensland Department of Environment and Science (DES) in collaboration with industry partners operates an air quality monitoring network across the state.
Data from the monitoring network is presented online as ambient concentration, air quality categories and smoke and dust health action levels which are updated hourly.
What’s new
From 19 July 2024 to 23 September 2024 the Hydrogen sulfide monitoring unit at the Redbank weather station will be temporarily relocated to Abrahams Rd within the Swanbank industrial area to support quality assurance evaluation. Data captured during this period is relevant to Abrahams Rd in Swanbank.
Smoke and dust health action levels
There are currently no elevated health action levels.
Based on PM2.5 readings at air monitoring stations and smoke sensors at Tuesday 23 April 2024 11pm.
For current bushfire and smoke warnings, visit the Queensland Fire Department website.
Tuesday 23 April 2024 11pm
Hydrogen sulfide
Map markers are indicative only. They do not reflect the exact location of the stations.
Select a value within the table to generate charts and to download air quality data.
Station | Hydrogen sulfide (30min) ppb1hr avg about |
---|---|
Bundamba, Currawong Streetmap | 0 |
Collingwood Park, Cathryn Courtmap | - |
Collingwood Park, Tambo Courtmap | 0 |
Dinmore, Hubert Streetmap | - |
Ebbw Vale, Grenadier Circlemap | 0 |
Redbank, Brigalow Lanemap | 0 |
Riverview, Carlyle Streetmap | 0 |
Riverview, Johnstone Placemap | 0 |
None of the data is validated (0% validated, 0/8 records)
The data used to compile this air quality information comes directly from the department's air monitoring network and has only undergone a preliminary quality check. Data is retrieved from the stations every hour and after quality checks, is available approximately 1 hour later.
All data on this site is shown in Australian Eastern Standard Time (AEST).
- If there is no data measured for a parameter, or data could not be retrieved from the monitoring station at this hour, no data is shown in the cell.
About these Hydrogen sulfide parameters
- Hydrogen sulfide (30min)
Hydrogen sulfide is a flammable, colorless gas that smells like rotten eggs. People usually can smell hydrogen sulfide at low concentrations in air ranging from 0.5 to 300 parts per billion (ppb). Hydrogen sulfide occurs naturally in crude petroleum, natural gas, volcanic gases, and hot springs. It can also result from bacterial breakdown of organic matter. Industrial sources of hydrogen sulfide include petroleum refineries, natural gas plants, petrochemical plants, coke oven plants, food processing plants, and tanneries.
The guideline for Hydrogen sulfide is 5ppb (30 min avg) for odour nuisance and 108ppb (24hr avg) for health and wellbeing.
Hydrogen sulfide (30min) is measured in parts per billion.