Skip links and keyboard navigation

Current smoke and dust levels

Health action levels are recommendations that have been developed by Queensland Health to support and inform the community on what actions to take to protect their health during a smoke event.

The health action levels are based on hourly PM2.5 measurements and provide separate advice on preventative actions for the general public and for individuals who are potentially more sensitive.

More about the health action levels.

What’s new

View the current smoke and dust levels across Queensland and general guidance on what actions to take to protect your health during a smoke event

Currently no elevated health action levels.

For current bushfire and smoke warnings, visit the Queensland Fire Department website.

Measurements as at Wednesday 4 December 2024 3am.

Legend to PM2.5 health action level colours about health action levels

  • 1good0–25µg/m3
  • 2fair25–50µg/m3
  • 3poor50–100µg/m3
  • 4very poor100–300µg/m3
  • 5extremely poor>300µg/m3
  •  Air monitoring station
  •  Smoke sensor

Map markers are indicative only. They do not reflect the exact location of the stations.

South East Queenslandmap

Air monitoring stations in South East Queensland

Wide Bay-Burnettmap

Air monitoring stations in Wide Bay-Burnett

Maryboroughmap

PM2.5 measuring is offline

Whitsundaymap

Air monitoring stations in Whitsunday

Sensors in Whitsunday

Bowenmap

PM2.5 measurement unavailable

North Queenslandmap

Air monitoring stations in North Queensland

Sensors in North Queensland

Townsvillemap

Air monitoring stations in Townsville

Mount Isamap

Air monitoring stations in Mount Isa

The data used to compile this air quality information comes directly from the department's air monitoring network and has only undergone a preliminary quality check. Data is retrieved from the stations every hour and after quality checks, is available approximately 1 hour later.

All data on this site is shown in Australian Eastern Standard Time (AEST).

An offline message indicates that measurements are temporarily unavailable due to equipment servicing or failure. See network status.

About Particle PM2.5

Airborne particles less than 2.5 micrometres in diameter, referred to as PM2.5, can be hazardous to human health or cause a nuisance when present in the air at elevated levels. They are capable of penetrating the lower airways of humans and can cause possible negative health effects.

The guideline for Particle PM2.5 is 50µg/m³ (1hr avg) and 25µg/m³ (24hr avg).

Particle PM2.5 is measured in micrograms per cubic metre.

More information about Particle PM2.5

Licence
Creative Commons Attribution 4.0 International (CC BY 4.0)
Last updated
4 December 2024