Skip links and keyboard navigation

Station overview—Josephville

Location of Josephville

Map marker is indicative only. It does not reflect the exact location of the station.
See all stations in South East Queensland region.

Meteorological information collected at the Josephville monitoring station is used to track the movement of emissions from industries located in the Bromelton State Development Area.

Monitoring period
1 September 2013–
Parameters monitored

Current measurements at 5am 5 October 2024

Meteorological
ParameterMeasurement
Wind direction231deg
Wind speed1.3m/s
Humidity86.9%
Temperature11.5°C
Rainfall0mm

Legend to air quality category colours about category values

  • Good
  • Fair
  • Poor
  • Very poor
  • Extremely poor

None of the data is validated (0% validated, 0/5 records)

About air quality categories

Air quality categories are used to make it easier to interpret air quality data by reducing the complexity associated with different pollutant concentration units and air quality guideline values.

Each air quality measurement from a monitoring station is assigned an air quality category rating based on comparison of the measurement value against the relevant air quality guideline. Five colour-coded air quality categories are used, being ‘Good’ (green), ‘Fair’ (yellow), ‘Poor’ (orange), ‘Very poor’ (red) or ‘Extremely poor’ (dark red). Values greater than the air quality guideline will be appear as ‘Poor’, ‘Very poor’ or ‘Extremely poor’.

More information about air quality categories.

About these parameters

Wind direction

When high pollutant concentrations occur at a monitoring station, wind data records can determine the general direction and area of the emissions. Identifying the sources means planning to reduce the impacts on air quality can take place. The measurement indicates the direction the wind is coming from.

Wind direction is measured in degrees.

More information about Wind direction

Wind speed

When high pollutant concentrations occur at a monitoring station, wind data records can determine the general direction and area of the emissions. Identifying the sources means planning to reduce the impacts on air quality can take place.

Wind speed is measured in metres per second.

More information about Wind speed

Humidity

Like temperature and solar radiation, water vapour plays an important role in many thermal and photochemical reactions in the atmosphere.

Humidity is measured in percentage.

More information about Humidity

Temperature

Measuring temperature supports air quality assessment, air quality modelling and forecasting activities.

Temperature is measured in degrees Celsius.

More information about Temperature

Rainfall

Rain has a ‘scavenging’ effect when it washes particulate matter out of the atmosphere and dissolves gaseous pollutants. Removing particles improves visibility. Where there is frequent high rainfall, air quality is generally better.

More information about Rainfall

Licence
Creative Commons Attribution 4.0 International (CC BY 4.0)
Last updated
8 July 2024