Skip links and keyboard navigation

Station overview—Toogoom

Location of Toogoom

Map marker is indicative only. It does not reflect the exact location of the station.
See all stations in Wide Bay-Burnett region.

Following the extensive 2019–2020 summer bushfires in Queensland, the Department of Environment and Science is expanding air quality monitoring throughout the State to provide more communities with locally relevant particle exposure information and health action advice during smoke and dust events. This expansion includes a network of smoke sensors which provide indicative measurements of smoke and dust levels.

Monitoring period
5 April 2023–
Parameters monitored

Current measurements at 10pm 13 December 2024

Meteorological
ParameterMeasurement
Wind direction198deg
Wind speed0.2m/s
Temperature24.6°C
Smoke sensors
ParameterMeasurementRunning average
Particle PM2.50µg/m³0.1µg/m³ (24hr avg)

Legend to air quality category colours about category values

  • Good
  • Fair
  • Poor
  • Very poor
  • Extremely poor

None of the data is validated (0% validated, 0/4 records)

About air quality categories

Air quality categories are used to make it easier to interpret air quality data by reducing the complexity associated with different pollutant concentration units and air quality guideline values.

Each air quality measurement from a monitoring station is assigned an air quality category rating based on comparison of the measurement value against the relevant air quality guideline. Five colour-coded air quality categories are used, being ‘Good’ (green), ‘Fair’ (yellow), ‘Poor’ (orange), ‘Very poor’ (red) or ‘Extremely poor’ (dark red). Values greater than the air quality guideline will be appear as ‘Poor’, ‘Very poor’ or ‘Extremely poor’.

More information about air quality categories.

About these parameters

Wind direction

When high pollutant concentrations occur at a monitoring station, wind data records can determine the general direction and area of the emissions. Identifying the sources means planning to reduce the impacts on air quality can take place. The measurement indicates the direction the wind is coming from.

Wind direction is measured in degrees.

More information about Wind direction

Wind speed

When high pollutant concentrations occur at a monitoring station, wind data records can determine the general direction and area of the emissions. Identifying the sources means planning to reduce the impacts on air quality can take place.

Wind speed is measured in metres per second.

More information about Wind speed

Temperature

Measuring temperature supports air quality assessment, air quality modelling and forecasting activities.

Temperature is measured in degrees Celsius.

More information about Temperature

Particle PM2.5

Airborne particles less than 2.5 micrometres in diameter, referred to as PM2.5, can be hazardous to human health or cause a nuisance when present in the air at elevated levels. They are capable of penetrating the lower airways of humans and can cause possible negative health effects.

The guideline for Particle PM2.5 is 50µg/m³ (1hr avg) and 25µg/m³ (24hr avg).

Particle PM2.5 is measured in micrograms per cubic metre.

More information about Particle PM2.5

Licence
Creative Commons Attribution 4.0 International (CC BY 4.0)
Last updated
8 July 2024