Skip links and keyboard navigation

Live air data

The Queensland Department of the Environment, Tourism, Science and Innovation (DETSI) in collaboration with industry partners operates an air quality monitoring network across the state.

Data from the monitoring network is presented online as ambient concentration, air quality categories and smoke and dust health action levels which are updated hourly.

What’s new

View the current smoke and dust levels across Queensland and general guidance on what actions to take to protect your health during a smoke event

Current smoke and dust levels

There are currently no elevated health action levels.

Based on PM2.5 readings at air monitoring stations and smoke sensors at Friday 22 November 2024 9pm.

For current bushfire and smoke warnings, visit the Queensland Fire Department website.

Friday 22 November 2024 9pm

Air quality data is available from 1 January 2016. Individual stations have been monitoring for different time periods so data may not be available for all possible times.

Hydrogen sulfide

Map markers are indicative only. They do not reflect the exact location of the stations.

Select a value within the table to generate charts and to download air quality data.

South East Queenslandmap
StationHydrogen sulfide (30min) ppb1hr avg about
Church weather station, Redbank Plainsmap0
Hockey weather station, Raceviewmap0
Redbank weather station, Redbankmap0
Ripley weather station, Ripleymap0
Riverview weather station, Riverviewmap0
South Ripley weather station, South Ripleymap0
Staines weather station, Redbank Plainsmap0
Swanbank weather station, Swanbankmap0

None of the data is validated (0% validated, 0/8 records)

The data used to compile this air quality information comes directly from the department's air monitoring network and has only undergone a preliminary quality check. Data is retrieved from the stations every hour and after quality checks, is available approximately 1 hour later.

All data on this site is shown in Australian Eastern Standard Time (AEST).

  • If there is no data measured for a parameter, or data could not be retrieved from the monitoring station at this hour, no data is shown in the cell.

About these Hydrogen sulfide parameters

Hydrogen sulfide (30min)

Hydrogen sulfide is a flammable, colorless gas that smells like rotten eggs. People usually can smell hydrogen sulfide at low concentrations in air ranging from 0.5 to 300 parts per billion (ppb). Hydrogen sulfide occurs naturally in crude petroleum, natural gas, volcanic gases, and hot springs. It can also result from bacterial breakdown of organic matter. Industrial sources of hydrogen sulfide include petroleum refineries, natural gas plants, petrochemical plants, coke oven plants, food processing plants, and tanneries.

The guideline for Hydrogen sulfide is 5ppb (30 min avg) for odour nuisance and 108ppb (24hr avg) for health and wellbeing.

Hydrogen sulfide (30min) is measured in parts per billion.

More information about Hydrogen sulfide (30min)

Licence
Creative Commons Attribution 4.0 International (CC BY 4.0)
Last updated
25 November 2024